Liquid Management Solutions
HYDROLOC offers the most appropriate on-site liquid containment solutions. These include high quality acid/alkaline resistant linings, waterproof membranes and protective coatings.
The HYDROLOC range is a waterborne modified elastomeric coating formulated both as a single part emulsion or a two-component fast setting product.
When fully bonded and solidified, the coating provides a flawless membrane delivering protection against water and chemical intrusion.
Like all HYDROLOC coatings, our range is cold-applied and non-toxic (no VOCs), reducing the risk of harm or injury to the applicator and the environment. It can be applied to most substrates including concrete, wood, foams and metal.
Flagship Products
HYDROLOC Industry
HYDROLOC Industry is a water-based elastomeric coating that provides exceptional corrosion and waterproofing protection for a variety of metal surfaces. Spray applied in conjunction with an inorganic rapid-set accelerator, HYDROLOC Industry instantly forms a rubberized, fully adhered seamless membrane that resists cracking, aging and separation. It can be applied to lightly rusted or corroded surfaces.
Available in 205 and 1000 litre
Major Applications & Areas of use
• Commercial metal structures and elements
• Mining, pulp & paper, and processing plants
• High protection in salt-water exposure
• Processing tanks and metal containment structures
Key Performance features
• Seamless waterproofing membrane
• Safe and easy application
• No VOC content or harmful odours
• Highly resistant to salts, chemicals and acids
• Extreme resistance to cracking and aging
• Impact, abrasion and puncture resistant
• Freeze/thaw stable
• Cold-applied and water-based for increased worker safety
HYDROLOC Industry Data Kit
- Technical Data Sheet
- Safety Data Sheet
- Application Procedures
- Quality Assurance
HYDROLOC Roof
HYDROLOC Roof is the most environmentally friendly, elastomeric bitumen emulsion that forms the basis for a high performance, cost efficient, liquid applied, monolithic, waterproofing membrane. Spray applied in combination with an inorganic rapid set accelerator, HYDROLOC Roof instantly forms a rubberized, fully adhered continuous waterproof membrane for new and restoration roofing projects.
Available in 205 and 1000 litre
Major Applications and areas of use
• Commercial flat and low slope roofs
• Polyurethane spray foam and extruded foam boards
• Existing mod bit membranes
• Metal roofs
• Metal cladding and plywood
• PVC, TPO and EPDM
Key Performance features
• Excellent Waterproofing – low vapour permeability
• Easy and fast application
• No VOC content
• No harmful odours
• High chemical resistance
• Impact, abrasion and puncture resistance
• Extremely resistant to cracking and aging
• Flexible and seamless
• Freeze/thaw stable
• No heating necessary
HYDROLOC Roof Data Kit
- Technical Data Sheet
- Safety Data Sheet
- Application Procedures
- Quality Assurance
HYDROLOC Concrete
HYDROLOC Concrete is applied via the HYDROLOC HVLP twin-tip spray unit, providing users with a protective and waterproof coating. HYDROLOC has designed the sprayed material to set instantly to concrete surfaces producing a flexible rubber-like membrane. This product is comprised of a specific grade of bitumen emulsion which has been modified with elastomeric polymers.
Available in 205 and 1000 litre
Major Applications & Areas of use
• Commercial and industrial foundations
• Conduit, tunnel and retaining walls
• Storage and process tank liners
• Secondary protection of pond liners
• Pre-cast concrete elements and pipes
Key Performance features
• Ease of application
• No solvents, VOCs and non-toxic
• Seamless waterproofing membrane
• High protection from water, salt and chemical damage
• Flexibility – no cracking from mechanical impact
• Freeze/thaw stable
• Safe alternative to hot-applied bitumen or solvent based products
HYDROLOC Concrete Data Kit
- Technical Data Sheet
- Safety Data Sheet
- Application Procedures
- Quality Assurance
HYDROLOC Brush & Roll
HYDROLOC Brush n Roll is a single-component, liquid applied corrosion protective waterproofing sealant combining various elastomeric polymers for a high-performance, durable, seamless membrane.
Containing no solvents, HYDROLOC Brush n Roll is non-flammable and will not damage polyurethane or polystyrene insulation materials. A variety of different reinforcing fabrics can be imbedded into the membrane to produce superior waterproofing and protection.
Available in 19.9 litre
Major Applications & Areas of use
• Metal roof maintenance & restoration
• Beams & pipes
• Tanks & containment areas
• Gutters & box gutter repair
• Flashing & vents
• Metal or concrete, plastic or wooden planter boxes
Key Performance features
• Waterproofing – low vapour permeability
• Easy and fast application
• No solvents, VOCs and harmful odours
• Excellent adhesion to the substrate
• Use directly over light rust
• High chemical resistance
• Extreme resistance to cracking and aging
• Impact, Abrasion and Puncture Resistant
• Flexible and seamless
• Safe Alternative to hot-applied bitumen or solvent based products
HYDROLOC Brush & Roll Data Kit
- Technical Data Sheet
- Safety Data Sheet
- Application Procedures
- Quality Assurance
HYDROLOC Bridging Tape
HYDROLOC Bridging Tape is a peel and stick product designed to accept HYDROLOC coatings onto its polyester backing. HYDROLOC Bridging Tape makes the surface watertight prior to the applying of the coating, creating a superior method of waterproofing over conventional 3 course applications and resulting in a supremely water tight finished system.
Major Applications & Areas of use
• All challenging heavy duty industrial applications
• Flat and sloped roofs
• Gutters and flashings
• Ponds
• AC units, skylights and vents
• Balconies
Key Performance features
• Exceptional adhesion
• Bonds to virtually any surface
• Conforms easily to odd shaped surfaces
• Quick and easy application
• No solvents, VOCs and harmful odours
• High chemical resistance
• Extreme resistance to cracking and aging
• Impact, Abrasion and Puncture Resistant
HYDROLOC Bridging Tape Data Kit
- Technical Data Sheet
- Safety Data Sheet
- Application Procedures
- Quality Assurance
HYDROLOC Geo-Tex
HYDROLOC Geo-TEX’s stitch-bonded polyester is one of the strongest materials available to the construction industry for use as a reinforcement material. Stitch-bonding offers an unusual combination of high strength properties with good elongation for excellent thermal stress force accommodations.
Major Applications & Areas of use
• Commercial flat and low slope
• Polyurethane spray foam and extruded foam boards
• Existing mod-bit membranes
• Metal roofs
• Concrete and plywood
• PVC, TPO and EPDM
Key Performance features
• High strength by design
• Low tear – good elongation
• Quick and easy application
• High chemical resistance
• No solvents, VOCs and harmful odours
HYDROLOC Geo-Tex Data Kit
- Technical Data Sheet
- Safety Data Sheet
- Application Procedures
- Quality Assurance
HYDROLOC Part B Salt
HYDROLOC Part B Salt is mixed with the HYDROLOC HVLP twin-tip spray unit, which is specifically designed for HYRDOLOC bulk spray grade products. HYRDOLOC Part B Salt is sprayed concurrently through the bespoke twin nozzle spray gun, when spraying HYDROLOC Industry, Roof and Concrete.
HYDROLOC Part B Salt Data Kit
- Technical Data Sheet
- Safety Data Sheet
- Application Procedures
- Quality Assurance
Get a free quote for your next project
Whether you are sealing under the link slab of a bridge deck, coating the inside of a containment vessel for toxic or acidic chemicals, or waterproofing the external facade of a basement wall, HYDROLOC has the very best product for every application in this space. HYDROLOC will assist you to formulate realistic costings for tenders and quotations.